SailSteer

Navigation software from B&G, combining sailing data like heading, wind, laylines and tide into one clear and informative screen.

Also overlays data onto the chart screen, enabling quick and accurate assessment for the route you wish to sail. This Navigation data is computed via laylines, instead of just straight waypoint systems, giving a much better outcome for sailing.

Your Boat is shown in the centre of the screen, always Heading to the top, circled by a compass rose which moves as you change Heading. Indicators show Apparent Wind Angle (AWA), True Wind Direction (TWD) and Course Over Ground (COG). If you are navigating to a Waypoint, the SailSteer screen will also show the Bearing to the Waypoint.

The central blue arrow shows tidal flow and set and at the bottom of the diagram you can see your >Rudder angle.

All the data is also visible in the two columns either side of the diagram.

Note: requires Requires B&G wind Sensor, B&G Depth/Speed Sensor and B&G GPS Antenna in the system for SailSteer function.