Skin Fitting
Similar Terms: Skin Fittings
refers to the fittings used to maintain any hole through the Hull of a Boat, to allow seawater in (ie. for engine cooling) or waste water out. Skin Fittings below the >Waterline must be fitted with a valve (sea cock) so that they can be closed.
Materials used to manufacture skin fittings can vary, depending on the type of Hull they are installed in, with Bronze skin fittings or dezincification resistant brass (DZR, usually marked CR), nylon and Stainless Steel being commonly used. Do Not use brass fittings - normal brass is a copper/zinc alloy and the zinc will leach in saltwater, leaving weakend copper in its place
Stainless Steel and Nylon Skin Fitting
Bronze Skin Fitting
Moulded Plastic Skin Fitting
Related Products
-
Bait Tank Aerator Kit
RRP: $149.90
NOW: $139.45
-
Live Bait 30L Tank Kit inc. Discharge Pipe, 2 x Skin Fittings, Aerator Head, 1.6m Hose & Hose Clamps
RRP: $272.65
NOW: $267.90
-
Grey Waste Tank With Pump
From: RRP $259.90
$249.30
-
Skin Fitting with Water Scoop
From: RRP $78.90
$75.50
-
Skin Fittings Acetal
From: RRP $14.90
$13.30
-
Skin Fittings Stalon Straight
From: RRP $20.90
$19.05
-
Bronze Skin Fittings
From: RRP $68.00
$67.50
-
Tru-Design Backing Nuts
From: RRP $9.90
$8.95
-
Tru-Design Composite Skin Fittings Recessed
From: RRP $11.00
$10.00
-
Tru-Design Composite Skin Fittings with Tail
From: $10.00
-
Tru-Design Solenoid Vented Loops
From: RRP $239.90
$210.70
-
Timber Bungs
From: $5.50
-
Bilge Pump Installation Kits
From: RRP $21.90
$19.95
-
Tru Design Skin Fitting Install Tools
From: RRP $6.90
$6.10
-
MarineTown Mega Flow Skin Fittings
From: RRP $40.95
$37.00
-
Stainless Steel G316 Skin Fitting - 25mm Hose Tail
RRP: $42.95
NOW: $39.00
-
Attwood Composite PVC & Stainless Steel Skin Fitting - Straight
RRP: $21.15
NOW: $19.50
-
Attwood Composite PVC & Stainless Steel Skin Fitting - 90°
RRP: $25.20
NOW: $23.50
-
CAN-SB Skin Fitting with 90° Tail
From: RRP $14.45
$13.75
-
Tru-Design Domed Extra Long Skin Fittings
From: RRP $23.90
$21.75