SeaStar Quick Connect 3 Turn Steering System

Quick Connect 3 Turn Steering System is the most popular Boat steering system ever made. Quick response 3.0 turn system is rated for all outboards to V6. Boats travelling over 40 knots, or when engine flutter is apparent, should use twin cables. Simple and reliable connection at the Helm makes installation a snap.

Steering wheels ordered separately.

Features:

• Compact rotary Helm occupies minimal space behind dash
• Cable will fit through minimum Channel of 23mm
• Standard 3/4” tapered steering wheel shaft
• Stainless steel cable output end minimises corrosion
• Meets ABYC, NMMA and BIA requirements

Kit Inclusions:

• 1 x 280132 single cable helm
• 1 x 280154 90O bezel
• 1 x 2811XX *cable - choose the cable length to suit your boat

How to measure steering cables:

Measure cable Routing path from wheel centre Line to engine connection as follows:

A = Centre Line of wheel to >Gunwale (or Deck, if routed downward)

B = Dash to transom

C = >Gunwale to centre Line of cable connection at centred tiller

For cable installations through the engine tilt tube - Add A, B and C, then add 150mm, then round up to the next size. Order that length cable.

For cable mounted to Transom, splashwell or stringer - Add A, B and C, then subtract 150mm and round up to the next size. Order that length cable.

Replacement of existing cable: If possible, find the part number stamped on the plastic Jacket of the old cable. If you removed the old cable, measure the replacement cable as shown to the right