Transducers
A good transducer is the heart and soul of your fishfinder! Incorporating some of the latest transducer technology, such as alternating or spectrum scanning transmitters or the use of 1000-watt in-hull or transom mount units, will allow incredible depth finder performance.
There are 4 main transducer models available, defined by how they are mounted on your vessel: Thru-Hull, Shoot-thru-hull (most often used for fiberglass hulls), transom-mount (best suited to trailerable size vessels) and portable transducers. The best transducer for you will depend a lot on your budget, boat type, shape and hull material and the fishing conditions it will be used in. Ideally a transducer needs to 'look' directly down and be mounted so that clean, turbulence-free water passes over its face.
Which is the Best Transducer for My Boat?
Hull Material Considerations:
Hull Material | Recommended Transducer Type |
Aluminium Hull (Tinny) | Transom Mount or Plastic Thru Hull |
Wooden Hull | Transom Mount or Bronze Thru Hull |
Fiberglass Hull | Transom Mount, Thru Hull (Bronze or plastic), Shoot Thru Hull/In-Hull |
Transducer Do's and Dont's:
- Plastic housings are recommended for fibreglass or metal hulls only. Never mount a plastic thru-hull housing in a wooden hull since swelling of the wood may overstress the plastic causing it to fracture.
- Bronze housings are recommended for fibreglass or wood hulls only. Never mount a bronze housing in a metal hull as electrolysis will occur.
- Never install a thru-hull transducer & leave the boat in the water unchecked for several days.
- Never use solvents on the transducer's face or the plastic housing.
- Always site the transducer so that external noise is minimised. Possible sources include air bubbles, propellers, generators, other echosounders.
- Transducer surfaces that can be painted must use a water based antifouling.
With the range of transducers available, selection can appear confusing and with the next generation of Lowrance Transducers and Airmar Broadband/CHIRP transducers arriving in-store – the definition will astound you! So speak with the marine electronics
Seaworthy Standard Stern Pads
From: RRP $81.45
$69.50
Seaworthy Jumbo Stern Pads
From: RRP $101.95
$86.50
Garmin 8 Pin Transducer to 4 Pin Sounder Cable
$39.00Adapter - 4 Pin Female to 6 Pin Male Transducer Cable
$29.00Adapter-6 Pin Female - 8 Pin Male
$39.00Garmin 6-Pin Transducer to 8-Pin Sounder Adapter Cable
RRP: $89.00
NOW: $88.50
Garmin 12-Pin to Dual 4-Pin Transducer Y Cable
RRP: $49.00
NOW: $47.50
Humminbird Transducer Extension Cable
From: RRP $209.90
$173.30
Garmin Transducer Extension Cable - 30ft - 12-Pin
$92.00Humminbird XNT Transducer Mount Bracket - MHX XNT - Plastic
RRP: $159.90
NOW: $135.00
Humminbird Kayak Transducer Kit
RRP: $159.90
NOW: $134.00
Universal Transducer Ram Arm for Kayaks
From: RRP $129.90
$113.00
Humminbird XNT Transom Transducer Mount Brackets
From: RRP $159.90
$135.00
Universal Transducer Ram Arm for Kayaks
RRP: $129.90
NOW: $113.00
Garmin Panoptix Livescope Perspective Mode Mount
RRP: $169.00
NOW: $163.50