Transducers
A good transducer is the heart and soul of your fishfinder! Incorporating some of the latest transducer technology, such as alternating or spectrum scanning transmitters or the use of 1000-watt in-hull or transom mount units, will allow incredible depth finder performance.
There are 4 main transducer models available, defined by how they are mounted on your vessel: Thru-Hull, Shoot-thru-hull (most often used for fiberglass hulls), transom-mount (best suited to trailerable size vessels) and portable transducers. The best transducer for you will depend a lot on your budget, boat type, shape and hull material and the fishing conditions it will be used in. Ideally a transducer needs to 'look' directly down and be mounted so that clean, turbulence-free water passes over its face.
Which is the Best Transducer for My Boat?
Hull Material Considerations:
Hull Material | Recommended Transducer Type |
Aluminium Hull (Tinny) | Transom Mount or Plastic Thru Hull |
Wooden Hull | Transom Mount or Bronze Thru Hull |
Fiberglass Hull | Transom Mount, Thru Hull (Bronze or plastic), Shoot Thru Hull/In-Hull |
Transducer Do's and Dont's:
- Plastic housings are recommended for fibreglass or metal hulls only. Never mount a plastic thru-hull housing in a wooden hull since swelling of the wood may overstress the plastic causing it to fracture.
- Bronze housings are recommended for fibreglass or wood hulls only. Never mount a bronze housing in a metal hull as electrolysis will occur.
- Never install a thru-hull transducer & leave the boat in the water unchecked for several days.
- Never use solvents on the transducer's face or the plastic housing.
- Always site the transducer so that external noise is minimised. Possible sources include air bubbles, propellers, generators, other echosounders.
- Transducer surfaces that can be painted must use a water based antifouling.
With the range of transducers available, selection can appear confusing and with the next generation of Lowrance Transducers and Airmar Broadband/CHIRP transducers arriving in-store – the definition will astound you! So speak with the marine electronics
Garmin Transducer Extension Cable - 12pin
$69.00Bell Marine Spray Deflector Transducer Covers
From: RRP $50.00
$46.60
Dragonfly Replacement Transducer Bracket
$48.00Garmin GT22HW-TM CHIRP Transom or Trolling Mount Transducer
RRP: $289.00
NOW: $283.50
CPT100 Chirp Transducer T/M
$253.25Raymarine Transducers
From: RRP $249.00
$237.00
TM265LH Dual Frequency Chirp Transom Transducer
From: RRP $2,299.00
$2,024.50
Garmin 200/50Khz T/M Standard Biducer - 8 Pin
RRP: $149.00
NOW: $132.50
Garmin Transducers
From: RRP $149.00
$132.50
Raymarine CPT-DVS Transducer
$187.00Furuno 50BL - 12HR 50Khz 2kW Rubber Transducer
RRP: $4,950.00
NOW: $4,911.00
Furuno 200B - 8B 200Khz 2kW Rubber Transducer
$880.00Furuno 82B 35R Transducer
RRP: $4,950.00
NOW: $4,699.00
Furuno 38BL 15HR 38kHz 3kW Rubber Transducer
RRP: $7,150.00
NOW: $7,036.00
Furuno 38BL 9HR 38kHz 2kW Rubber Transducer
RRP: $4,950.00
NOW: $4,911.00
Airmar P319 Plastic Thru Hull Deep Water Transducer
From: RRP $229.00
$208.00
Foulfree Transducer Paint Coating
RRP: $473.00
NOW: $63.50
Raymarine CPT120 CHIRP Transducer
RRP: $749.00
NOW: $728.00
Garmin 8 Pin Transducer to 4 Pin Sounder Cable
$39.00Adapter - 4 Pin Female to 6 Pin Male Transducer Cable
$29.00