Transducers
A good transducer is the heart and soul of your fishfinder! Incorporating some of the latest transducer technology, such as alternating or spectrum scanning transmitters or the use of 1000-watt in-hull or transom mount units, will allow incredible depth finder performance.
There are 4 main transducer models available, defined by how they are mounted on your vessel: Thru-Hull, Shoot-thru-hull (most often used for fiberglass hulls), transom-mount (best suited to trailerable size vessels) and portable transducers. The best transducer for you will depend a lot on your budget, boat type, shape and hull material and the fishing conditions it will be used in. Ideally a transducer needs to 'look' directly down and be mounted so that clean, turbulence-free water passes over its face.
Which is the Best Transducer for My Boat?
Hull Material Considerations:
Hull Material | Recommended Transducer Type |
Aluminium Hull (Tinny) | Transom Mount or Plastic Thru Hull |
Wooden Hull | Transom Mount or Bronze Thru Hull |
Fiberglass Hull | Transom Mount, Thru Hull (Bronze or plastic), Shoot Thru Hull/In-Hull |
Transducer Do's and Dont's:
- Plastic housings are recommended for fibreglass or metal hulls only. Never mount a plastic thru-hull housing in a wooden hull since swelling of the wood may overstress the plastic causing it to fracture.
- Bronze housings are recommended for fibreglass or wood hulls only. Never mount a bronze housing in a metal hull as electrolysis will occur.
- Never install a thru-hull transducer & leave the boat in the water unchecked for several days.
- Never use solvents on the transducer's face or the plastic housing.
- Always site the transducer so that external noise is minimised. Possible sources include air bubbles, propellers, generators, other echosounders.
- Transducer surfaces that can be painted must use a water based antifouling.
With the range of transducers available, selection can appear confusing and with the next generation of Lowrance Transducers and Airmar Broadband/CHIRP transducers arriving in-store – the definition will astound you! So speak with the marine electronics
Furuno SS175 CHIRP Transducers
From: RRP $2,480.00
$2,362.00
Foulfree Transducer Paint Coating
RRP: $473.00
NOW: $63.50
Airmar B75H Bronze T/H 130-210kHz Chirp Transducers
From: RRP $1,099.00
$1,062.00
Humminbird XPTH 14 HW T Solix Dual Spectrum CHIRP Thru-Hull Transducer
RRP: $619.00
NOW: $588.50
Humminbird Puck Transducer 200/83kHz Single/Dual Beam
RRP: $269.90
NOW: $217.50
Humminbird SS175M Medium CHIRP 1kW Transducers
From: RRP $2,729.00
$2,583.50
Furuno Airmar SS175M 20° Medium Chirp Transducer
RRP: $2,255.00
NOW: $2,201.00
Raymarine RV-100 RealVision 3D T/M Transducer
RRP: $909.00
NOW: $828.00
Raymarine CPT-S 0° Through Hull Element Transducer
RRP: $319.00
NOW: $307.50
Raymarine CPT-S 0/12/20° High CHIRP In-Hull Transducer
$335.50